SolarFam Mono 100Wp Black

• Narrow format: 1190 × 450 mm, ideal for limited roof space.
• 100Wp nominal power: suitable for maintenance charging and basic daily power needs.
• Black design: black frame and dark cell construction for a discreet look on the roof.
• MC4 connection: standard solar panel connectors, easy to combine with solar cables and MPPT controllers.
• IP67 junction box: suitable for outdoor use on motorhome roofs, provided it is correctly mounted and connected.

Tip: always measure your motorhome roof carefully beforehand. Allow for roof hatches, fans, roof rails, shade from accessories, and the location of the cable entry point. Also measure the space required for the mounting hardware. Roof supports or spoilers often protrude slightly beyond the panel, and the required space depends on the chosen mounting method.

Do you want to install multiple panels of the same type? Then you can choose a bundle with multiple SolarFam Mono 100Wp Black solar panels. A bundle discount applies when purchasing multiple panels at the same time.

• 1 × SolarFam Mono 100Wp Black – 100Wp
• 2 × SolarFam Mono Black 100Wp – 200Wp total
• 3 × SolarFam Mono Black 100Wp – 300Wp total
• 4 × SolarFam Mono Black 100Wp – 400Wp total

This 100Wp solar panel is suitable for fixed installation on motorhomes, van conversions, and other off-grid applications where a compact and narrow glass panel is desired.

• Maintenance charging of a leisure battery.
• Charging a 12V battery bank via a suitable MPPT charge controller.
• Basic daily power users such as LED lighting, phone chargers, water pump, and ventilation.
• Expanding an existing motorhome installation with additional solar power.
• Combining with multiple identical panels for more output.

This panel is usually mounted with aluminium roof supports or spoilers. Ensure a strong mechanical mounting, good sealing, and a neat cable route inside.

• Use suitable aluminium roof supports or 45 cm spoilers.
• Clean the roof thoroughly to remove grease and follow the instructions for the adhesive, sealant, and primer used.
• Use a suitable roof cable entry for the solar cables.
• Secure cables on the roof properly with UV-resistant adhesive cable mounts and cable ties.
• Prevent cables from rubbing, kinking, or moving freely during driving.

Do not connect this solar panel directly to the battery. Always use a suitable charge controller, preferably an MPPT charge controller. It converts the panel voltage to a suitable charging voltage for your battery.

• Use UV-resistant solar cable between the panel and charge controller.
• Use a suitable MPPT charge controller for your solar panel installation.
• Always place a fuse or suitable DC protection on the battery side of the MPPT.
• For smaller systems, use a battery cable set with a fuse, for example.
• With multiple panels: check whether the maximum input voltage and charging current of the MPPT are suitable.

• Aluminium roof supports or 45 cm spoilers
• Roof cable entry for solar cables
• 4mm² solar cable set with MC4 connectors
• MPPT charge controller suitable for the number of panels
• Battery cable set with fuse
• DC circuit breaker for safe maintenance

Do you want to put together a complete set? Send us a photo of your roof and your current electrical system, and we will help you put together a practical solution.

• Connecting the solar panel directly to a battery without a charge controller.
• Using an undersized or unsuitable MPPT with multiple panels.
• Combining panels with different voltages or power ratings without checking the specifications.
• Using cables that are too thin for longer cable lengths, causing unnecessary voltage drop.
• Not installing a fuse or DC protection on the battery side of the charge controller.
• Leaving cables loose on the roof, risking rubbing, leaks, or cable failure.
• Insufficiently sealing the roof cable entry or using the wrong sealant/primer for the roof material.

Is this a 12V solar panel?
This panel is often used in 12V motorhome systems, but you do not connect it directly to a 12V battery. You use a suitable MPPT charge controller between the solar panel and the battery.

Can I combine multiple SolarFam 100Wp panels?
Yes, this is usually fine when combining identical panels. Pay attention to the correct series or parallel wiring and choose an MPPT controller that suits the total power and maximum voltage.

Is one 100Wp panel enough for my motorhome?
That depends on your power consumption. 100Wp can help with low basic power needs, but a compressor refrigerator, laptop use, or several days off-grid often requires more solar power and battery capacity.

Will this panel fit on any motorhome roof?
Not always. The panel is narrow, but 1190 mm long. Therefore, measure carefully beforehand to see if the panel fits next to roof hatches, fans, rails, and other obstacles. Also allow for extra space for the chosen roof supports or spoilers.

Which MPPT do I need?
That depends on the number of panels, the wiring method, and your battery installation. If in doubt, you can send us the number of panels and your system voltage, and we will advise on a suitable controller.