You want to know how to get started
Before you start, you want to know how the installation is structured and where each component goes.
Self-build with support
Build it yourself, with a technical plan that works.
You build the camper electrical system. We create the technical drawing, select the components accordingly, and help you during the build.
Is guided self-build right for you?
Build it yourself, without having to figure everything out yourself
This approach is right for you if you want to build it yourself, but want to know clearly beforehand what you need and how everything is connected.
You want to be able to ask for help
During construction, you want to be able to consult someone if you run into any problems.
You want everything to fit together
Components, cables, fuses and connection materials are logically matched in advance.
Before you begin
This is ready before you start
What you receive to design and build your installation yourself.
Advice and system choices
Together, we’ll determine which system best suits your energy usage, equipment, and travel plans.
Technical drawing to scale
You will see how components are connected and which cable cross-sections, fuses, connection points, and cable lugs are required.
No standard design, but a technical drawing for your camper.
Parts that work together
Faraday supplies the components and connection materials according to the drawing, so you don't have to source everything yourself.
Four hours of guidance
You allocate the four coaching hours to the times when you need explanation or help.
You can find practical exceptions in the FAQ.
Build it yourself with a clear plan
How we work together
You build. Faraday designs and advises.
You mount, wire and connect the installation yourself. We make sure you know what you are building and help you if you have a technical question during installation.
01
We map out your usage
During the consultation, we will discuss your camper, equipment, and travel plans.
02
We are developing the design
You will receive the technical drawing and the parts that go with it.
03
You build with guidance
You carry out the installation and connections and use the support hours when you need them.
Clear division of tasks
You build this yourself.
You build carefully according to the technical drawing. Faraday guides the design and answers technical questions within the agreed hours.
✓
Design, drawing and material selection by Faraday
✓
Installation, cabling and connection by you
Which route is right for you?
Build it yourself or have more of it pre-built?
Both routes start with a design that suits your camper and how you use it. The difference is how much Faraday builds for you in advance.
01
Guided self-build
You build it yourself
You build based on our design and use the guidance hours when you need them.
02
Installation Plate
Have more built in advance
Faraday builds, wires, configures and tests the electrical installation in advance on a board. You then install the system in the camper.
How much do design and guidance cost?
A detailed plan and support during your own build
You are paying for a technical design that will enable you to build with a clear plan, as well as support should you have any questions during construction.
Technical custom drawing
€150 incl. VAT
Four hours of guidance
€325 incl. VAT
Together
€475 incl. VAT
Consultation temporarily €49
The consultation currently costs €49 incl. VAT (normally €95). Continuing with guided self-build afterwards? We credit the full amount paid towards the €475 for the drawing and four hours of guidance. Components and materials are charged separately.
The required components and materials are not included. For guided self-build, Faraday preferably supplies the main system components, cables, fuses and connection materials. This helps keep the design, component selection and guidance aligned.
Already bought components? We first assess whether and how we can build on them. We agree in advance on the guidance, any additional components needed and responsibility for the installation.
Client projects
Built yourself, with our guidance
From electrical design to the final settings: see how we helped these DIYers implement their camper electrical system.
TOGETHER CONFIGURED AND TESTED
↗
01
Frank's Toyota Land Cruiser
Frank built his 24V system himself. We provided the design and components and helped with connecting the batteries, setting up, and testing.
BUILDING WITH A PLAN
↗
02
Self-build in a Mercedes Vario 618D
For this self-build camper, we helped with an electrical plan, suitable components, and technical guidance. This allowed the owner to carry out the installation themselves.
ELECTRIC COOKING ON THE GO
↗
03
Lars and Tamara's family camper
Lars and Tamara also wanted to be able to cook with electricity while on the road. We helped with the design, the materials, and guidance in building their camper's electrical system.
Swipe om meer projecten te bekijken
Experience of self-builders
Build it yourself with someone to fall back on
Experiences with the plan, the materials, and the guidance during real camper projects.
★★★★★
Faraday Energy professionally helped us with the electrical plan for our self-build camper. All components were delivered neatly and we assembled the installation ourselves according to the plan. For the final points and setting up the apps, Peter helped us well. We couldn't be happier when everything worked.
★★★★★
Great for people who are DIY-ing their electrical systems, for example, in a camper van, like we did.
★★★★★
Calling to go over the order together to ensure everything is correct, contributing ideas to the project, and ensuring fast delivery!