Living and working on the go
The energy supply supports a daily rhythm in which living, working, cooling, and charging come together.
Freedom camper electrical system
Space for life on the go.
A pre-assembled installation board in which energy storage, charging, distribution and central monitoring work together as one system.
From €8,295 incl. VAT
Long trips and winter storage · Intensive electrical use · Induction and powerful 230V
Practical application
What can you do with Freedom?
Freedom is designed for travelers who use their camper as a fully functional living space on the road and consider electrical comfort an integral part of their daily lives.
Induction cooking
Cook on induction and use heavier 230V appliances, matched to the available power of the system.
Independent for longer
The generous energy storage is suitable for longer trips, wintering, and periods when shore power is not guaranteed.
Unsure how much energy your way of traveling requires?
Technical basis
The technical foundation, simply explained
Four technical choices together form the Freedom foundation.
Approximately 5.12 kWh energy storage
The Ultimatron 25.6V 200Ah lithium battery offers approximately 5,120Wh of nominal storage. This allows for intensive daily use and longer periods between charging. The built-in heater enables safe charging at low temperatures.
Optional: Victron Lithium NG 25.6V 300Ah (approx. 7.68 kWh) with Lynx Smart BMS 500 NG, instead of the Ultimatron battery and Lynx Shunt.
Approximately 2,400W continuous 230V power
The Victron MultiPlus-II 24/3000 delivers approximately 2,400W continuously for heavier 230V applications.
Use the Ekrano touchscreen to control and monitor the system. PowerAssist can supplement limited generator power from the battery if needed.
Charging in three ways
While driving, a Victron Orion XS 1400 charges from the vehicle. You can also charge from shore power, and the Victron MPPT 100/30 solar charger is prepared for approximately 880 Wp of solar panels.
Solar panels, roof mounting and solar cables are not included as standard.
24V for power, stable 12V for your camper
At 24V, less current flows for the same power. This reduces cable losses and keeps the system efficient during intensive use.
A Victron Orion 24/12-70A supplies stable 12V, so the usual 12V loads continue to operate on 12V.
Overview of the entire system
Insight into energy and main distribution
The Lynx Shunt VE.Can measures the current flowing into and out of the battery. The Lynx Distributor combines the main fused circuits. Ekrano GX shows the system status and energy flows in one central view, making the installation easy to monitor during use and maintenance.
More than separate components
Why Faraday
Pre-assembled. With attention to the whole.
Faraday takes care of the technical assembly on the installation board. You receive not a loose collection of components, but a logically prepared system.
01
Built up and internally wired
The components, layout, and connections on the board are assembled in a logical and clear manner.
02
Set and checked
We configure the equipment and test the operation of the assembled system before delivery.
03
Labeled and documented
You receive clearly identifiable connection points, a technical system drawing, and documented information about the supplied version.
Placement in the camper
Prepare for further installation
Faraday builds and prepares the installation board. You take care of the installation and the pre-agreed connections in the camper, with explanations and support where needed.
✓
Install it yourself with our instructions and support
✓
Need more help? Discuss the options
From advice to delivery
How your Freedom project progresses
From the initial consultation to pickup, you’ll know which step comes next.
01
Coordinate use and placement
We discuss your driving habits, energy consumption, charging options, 230V equipment and available space. This helps us determine whether Freedom is right for you.
02
Build in the workshop
After approval and final coordination, we plan and build the installation board in our workshop.
03
Pickup and further installation
When picking up in Raalte, we will go over the controls, connection points, and further installation with you.
Scheduling and payment
Upon commissioning, you pay a 50% deposit. The estimated delivery time is generally 2–4 weeks after approval, payment of the deposit, and final coordination.
One specific demo unit
Freedom demo board with 10% discount
The Freedom demo board from the camper show in Hardenberg: a complete 24V electrical system with approximately 5.12 kWh of storage and Ekrano GX. Includes the sanded and varnished wooden enclosure and LED lighting. View the version, photos, and installation details on the product page.
Experiences
Building together with confidence
Customers share their experiences with our advice, our involvement in their projects, and the personal support provided by Faraday.
★★★★★
Very good service and advice on the purchase of an electrical system (leisure battery, inverter, charging units, USB chargers, cables, fuses, etc.) for my self-build camper. With 4 solar panels, we are completely independent of the mains power supply.
★★★★★
Good explanation and information, and when we had a question after a year, we could come by immediately and were helped further. Top service!
★★★★★
Peter made a custom proposal, resulting in us having 3× 130 Wp on our camper van. Excellent guidance during the installation and it works perfectly.