More product groups & connection components
View the product groups for your installation. The right version depends on your equipment and installation.
Xenteq PurePower Switch inverter 24V 2000W
Xenteq PurePower Switch inverter 24V 2000W
In stock
Couldn't load pickup availability
Niet op voorraad in Raalte; afhalen kan na bestelling. Bestel vooraf; we laten weten zodra het klaarligt.
The Xenteq PurePowerSwitch 24V 2000W (PPS 2000-224) is a pure sine wave inverter with a built-in bypass / changeover relay. It automatically switches between mains electricity and the inverter, so that 230V appliances can remain connected without a separate changeover box.
What can you use it for?
- 230V available in your camper (24V system): laptop, chargers, cameras, small appliances.
- Use e-bike chargers or power tool chargers (pay attention to the total power).
- Kitchen appliances up to approximately 2000W (depending on the situation), as long as your battery pack and installation can handle it.
- Leave everything connected and automatically switch between mains electricity and the battery inverter.
Heating appliances (kettle, hairdryer, air fryer) often require a lot of power. Are you unsure whether 2000W is suitable for your usage and battery? Send us your appliances (Watts) and battery details, and we will help you choose quickly.
Unique: bypass function + selectable priority
The PurePowerSwitch has an internal changeover relay (bypass). As soon as mains electricity is available, the 230V output can automatically switch over to mains voltage. So you do not need to install a separate changeover box.
Choose priority (2 modes)
- MAINS priority: mains electricity takes precedence as soon as it is available (useful for conserving your battery).
- INV priority: the inverter/battery takes precedence; it only switches over to mains electricity when the set low-voltage threshold is reached (useful with a lot of solar energy).
Transfer times (indicative)
- Prio “MAINS”: mains voltage → inverter 40–65 ms, inverter → mains voltage 10–20 ms
- Prio “INV”: mains voltage → inverter 2–10 ms, inverter → mains voltage 45–75 ms
Practical for campers/mobile workshops and systems with (a lot of) solar energy.
Overload protection is provided by an external fuse.
PurePower app & control (real-time + settings)
- Real-time monitoring via the free PurePower app.
- Stand-by mode (useful if you temporarily do not need 230V).
- Personalize settings, including low-voltage monitoring and restart timer (charge first, then switch back on).
Extra convenience? This inverter can be expanded with a remote control: PPR-1 or PPR-3.
Installation & safety
- Always fuse: protect the battery cable with a suitable external fuse (as close to the battery as possible).
- Ability to isolate: ensure that you can safely isolate the inverter for maintenance (via the fuse, a DC circuit breaker, or the main switch of your system).
- Short, suitable cable route prevents voltage drop and unnecessary heat.
- Ventilation: active cooling (fan). Place in a free area and not in a confined hot space.
24V advantage (practical)
In a 24V system, the currents on the battery side are lower than at the same power in a 12V system. This often makes it slightly “quieter” in practice for cabling and voltage drop.
Would you like us to take a look at cable sizes, fuse rating, and placement? Send us a photo of your setup + battery type + distance between inverter ↔ battery.
Specifications (summary)
- Model: PPS 2000-224
- Input (nom.): 24 Vdc (input voltage range 20.0–33.0 Vdc)
- Output: 230 Vac ± 5% (50 Hz ± 1%)
- Sine wave: pure sine wave
- Power: 2000 W continuous / 4000 W peak
- Soft-start: yes (3–5 sec)
- Efficiency: max. 92%
- Protections (input, auto-reset): low input voltage warning (acoustic), low voltage, overvoltage
- Protections (output, auto-reset): overload, temperature
- No-load, switched on*: ± 0.6 A / 1.0 A**
- No-load, stand-by*: 0.08 A
- No-load, “sleep mode”*: 0.1 – 0.2 A
- App capability: yes, via the PurePower app
- Battery connection: 2× M6 bolts
- Included battery cables: 80 cm, 16 mm², with cable eyes
- Bypass function: internal changeover relay + priority switch (MAINS / INV)
- Bypass overload protection: via external fuse
- USB output: no
- Cooling: fan
- Environment: 0–40°C, 20–90% RH (without condensation)
- Dimensions (lxwxh): 33.3 × 23.5 × 10.9 cm
- Weight: 6 kg
* Measured at 25.2 V. Depending on battery voltage, battery quality, and temperature. ** If no mains voltage is available, the no-load current may be higher.
Why through Faraday Energy?
- Help choosing the right one: 2000W vs 3000W, and what that means for the battery, BMS, and cabling.
- Practical installation advice (fuse, cable route, placement, and 230V distribution).
- Support with bypass/priority settings and app parameters.
- One point of contact for delivery and service.
Need advice? (quick check)
Send us these 3 things, and you will quickly receive suitable advice:
- Battery: type (AGM/LiFePO₄), capacity (Ah), and 24V system
- Which 230V appliances you want to use (with Watts)
- Distance between inverter ↔ battery (approximately)
Tip: combine this inverter with the right fuse holder and cable set. Then it will not only be “working”, but also safe and trouble-free.
