Victron Phoenix 12V/800 VE.Direct

The Phoenix 12/800 is suitable when you want to connect more than just a phone or laptop charger. Think of:

• E-bike chargers: one or more suitable chargers, depending on their combined power consumption and inrush current.
• A mobile workspace: laptop, monitor, and other small office equipment.
• Television and audio: for use in your camper or boat.
• Battery chargers: for cameras or power tools, provided the charger stays within the power limits.

The 800 VA rating is not the same as 800 W continuous power. This version delivers 650 W at 25 °C and 560 W at 40 °C. When choosing, take into account the temperature in the room where you install the inverter.

The peak power of 1500 W is briefly available for starting up a load. It is not power that you can use for an extended period.

The pure sine wave output is suitable for electronic devices and chargers that fall within the power limits of the inverter.

In ECO mode, the inverter goes into standby when there is insufficient load and periodically checks whether power is required again. This limits the unit's own consumption when devices are switched off.

Small chargers may not be properly detected in ECO mode. In that case, adjust the detection settings or use the normal on mode.

You use the VE.Direct port for communication with the inverter. For wireless reading out and configuration via VictronConnect, you need the separately available VE.Direct Bluetooth Smart dongle. Bluetooth is not built-in.

For connection to a computer, a VE.Direct-to-USB interface is available. In addition, the inverter has a remote on/off connection for a suitable external switch.

Use a 12V battery that can deliver sufficient discharge current. The required battery capacity depends on the connected power and the desired duration of use. For a lithium battery, also check the maximum continuous and brief current of the BMS.

• Keep battery cables short and size the cable cross-section according to the current, cable length, and voltage drop.
• Place a suitable cable fuse at the positive terminal of the battery.
• Install the inverter in a dry and well-ventilated location, with sufficient free space for cooling.
• For a fixed 230V installation, also coordinate grounding, protection, and mains switching with the complete installation.

Can I charge two e-bikes at the same time?
This is possible if the two chargers together stay within the available continuous power and their inrush current is suitable. Check both chargers; the number of bikes alone does not tell you how much power you need.

What is the difference with the Phoenix 12/500?
The 12/800 offered here delivers 650 W continuously at 25 °C. The Phoenix 12/500 from our range delivers 400 W. The 12/800 therefore offers more room for larger or multiple simultaneous users.

Can I connect it to a 24V battery?
No. This is the version for a nominal battery voltage of 12 V.

Does it charge my battery when I have mains electricity?
No. A separate battery charger or inverter/charger combination is required for that.

Are you unsure if this inverter is sufficient?
Send Faraday Energy the data of your devices and mention which ones you want to use at the same time. With your battery type and the distance between the battery and inverter, we can also help you with the connection.