Victron Phoenix 12V/375 VE.Direct

This inverter is suitable for small loads that stay within the available power, such as:

• Laptop adapters: for working, watching movies, or charging your laptop.
• Camera and phone chargers: use your existing mains chargers on the go.
• A small television or monitor: depending on the power consumption.
• Small audio equipment and other electronics: check the power consumption and inrush current.

The rated power is 375 VA. The available continuous power of this version is 300 W at 25 °C and 260 W at 40 °C. Take a warm mounting location into account, for example in a closed cabinet.

The peak power of 700 W is intended for a short-term inrush current. It does not mean that you can use a 700 W device continuously.

The pure sine wave output is suitable for compatible electronic devices and chargers. Even without a connected load, a switched-on inverter uses power itself.

With ECO mode, the inverter goes into standby when there is insufficient load. It periodically checks if a device requires power again. This limits its own consumption when your connected equipment is switched off.

Small chargers may not be properly detected in ECO mode. In that case, adjust the detection settings or use the normal on mode. Switch off the inverter when you do not need it.

This Phoenix has no built-in Bluetooth. For wireless reading out and configuring, use the separately available VE.Direct Bluetooth Smart dongle with VictronConnect on a suitable phone or tablet.

For a computer connection, a VE.Direct-to-USB interface is available. The VE.Direct port is a communication connection, not a connection for charging USB devices.

Use a suitable 12V battery that can deliver sufficient discharge current. The required battery capacity depends on your devices and the desired duration of use. For lithium batteries, also check the current limits of the BMS.

• Keep battery cables short and size the cable cross-section according to the current, cable length, and voltage drop.
• Place a suitable cable fuse at the positive terminal of the battery.
• Mount the inverter in a dry and well-ventilated location, with free space for cooling.
• When connecting to a fixed 230V installation, also ensure that earthing, protection, and any mains power switching are correctly carried out.

Can I charge an e-bike with this?
Only if the power consumption and inrush current of the charger fit. With this small inverter, this check is extra important. Look at the charger specifications, not the motor power of the bike.

When should I choose the Phoenix 12/500?
If your devices require more power or you want to connect more at the same time. The Phoenix 12/500 from our range delivers 400 W continuously at 25 °C; this 12/375 delivers 300 W.

Does the inverter work without a Bluetooth dongle?
Yes. For normal use, the on/off/ECO switch on the inverter is sufficient. The dongle is an optional accessory.

Can I connect it to a 24V battery?
No. This model is intended for a rated battery voltage of 12 V.

Are you unsure if your devices are suitable?
Send Faraday Energy the specifications or a photo of the type plate of your devices . Mention which ones you want to use at the same time and which battery you have, and we will help you with targeted advice.