Connection components & accessories
View the product groups for your installation. The right version depends on your equipment and installation.
Victron LiFePO4 Lithium NG battery 12.8V/300Ah-Smart
Victron LiFePO4 Lithium NG battery 12.8V/300Ah-Smart
In stock
Couldn't load pickup availability
Niet op voorraad in Raalte; afhalen kan na bestelling. Bestel vooraf; we laten weten zodra het klaarligt.
The Victron Lithium NG 12.8 V/300Ah is a LiFePO4 battery for high-quality energy systems in campers, boats and off-grid installations. With 3840Wh of nominal energy, this model offers plenty of usable capacity and a high load capacity.
This battery is designed for integration with the Victron ecosystem and is combined with an external Lynx Smart BMS NG.
Why this Victron Lithium NG battery? ▾
- High energy density: 3840Wh storage in a relatively compact enclosure.
- High load capacity: maximum 300A continuously and 600A for a maximum of 10 seconds.
- Long lifespan: approximately 2500 cycles at 80% depth of discharge.
- Efficient: approximately 92% round-trip efficiency.
- Victron integration: battery data and protection are accessed via a compatible Victron BMS.
Specifications & dimensions ▾
12.8 V
300Ah
3840Wh
300A
600A
approximately 2500 at 80% DoD
M8
206 × 447 × 205 mm
29 kg
BMS and system compatibility ▾
The Lithium NG series requires an externally compatible Victron BMS. For medium-sized installations, the Lynx Smart BMS 500 NG is often suitable; for very high system currents, there is the Lynx Smart BMS 1000 NG.
- The BMS monitors the cells and intervenes in case of unsafe voltage or temperature.
- The choice of 500A or 1000A depends on the maximum charging and discharging current of the entire system.
- Combine the BMS with suitable Lynx distribution, main fuse and cable cross-sections.
Installation & safety ▾
- Mount the battery upright or on its side, but never with the connection terminals facing downwards.
- Secure the battery firmly against movement in all directions.
- Place a suitable main fuse as close as possible to the battery or battery bank.
- Size cables and connection materials for the maximum system current and cable length.
- Use charging equipment with a correct lithium charging profile.
What else do you usually need? ▾
- Victron Lynx Smart BMS NG, sized for the maximum system current.
- Main fuse and fuse holder or a suitable Lynx distribution.
- Battery cables, cable lugs and connection material with sufficient cross-section.
- Suitable battery charger, MPPT charge controller and optionally an alternator charger.
- Battery monitoring via VictronConnect and optionally a GX device with VRM.
FAQ ▾
Can I use this battery without a BMS?
No. Always use a compatible Victron BMS that can safely control charging and discharging.
Is this the same battery as the SuperPack NG?
No. The SuperPack NG has an integrated BMS. This Lithium NG battery is intended for a modular system with an external Lynx Smart BMS NG.
Which BMS version do I need?
That depends on the maximum inverter, charging and system current. If in doubt, we can check the system design and the required protection.
