Rocker switch KCD4 on/off – black – 15A / 250V AC

• KCD4 toggle switch with on/off function.
• Clear I/O marking on the front.
• Four flat spade terminals on the rear.
• Double-pole switching: two contacts are switched simultaneously.
• Suitable for panel mounting with plastic snap-in clips.
• Black plastic housing with a compact design.
• Maximum 15 A at 250 V AC.
• Maximum 20 A at 125 V AC.

This panel switch can be used for switching on and off lighting, equipment, and other electrical consumers that fall within the indicated AC specifications.

• Control panels and switch cabinets.
• Electrical equipment with an on/off function.
• Lighting and other AC consumers.
• Projects where two contacts need to be switched simultaneously.
• Use as a control contact for a suitable relay.

This switch only lists an electrical load for alternating current (AC). The specified values of 15 A and 20 A therefore should not automatically be applied to a 12V or 24V direct current installation.

With direct current, it is more difficult to interrupt the electrical arc between the switching contacts. As a result, the allowed DC load may be lower than the specified AC load.

For larger DC consumers, such as a compressor refrigerator, heavy-duty lighting, or other equipment with a high inrush current, use this switch preferably only as a control contact for a suitable 12V or 24V relay.

The switch has four flat spade terminals. Internally, two separate contacts are opened or closed simultaneously.

• Use properly fitting flat spade cable lugs.
• Ensure that the cable lugs are securely attached to the terminals.
• Match the cable cross-section to the connected load.
• Install a correctly sized fuse in the power cable.
• Mount the switch in a suitable panel cutout.
• Avoid mechanical stress on the terminals and wiring.