DC Main Battery Switch 200A – Panel Mount Single Pole

This DC main battery switch 200A is intended for manually disconnecting the battery supply in 12V and 24V DC installations. Thanks to the compact panel mount design, sturdy M10 connection bolts and removable red key, the switch is suitable for motorhomes, boats, service vehicles and other off-grid installations.

With the main switch, the battery can easily be disconnected from the installation, for example during maintenance, long-term storage or when the vehicle or boat is not in use.

Features

• Rated current: 200A continuous
• Suitable for 12V and 24V DC systems
• Single-pole version
• Removable red switching key
• Includes black cover cap
• M10 connection bolts for secure battery cable connections
• Compact panel mount model for installation in a wall, panel or battery box
• Suitable as a main switch in motorhome, boat and off-grid installations

Panel Mount Dimensions

The switch has a compact design and can be mounted in both a new panel and as a replacement for an existing battery switch. The dimensions below are approximate and have been measured by us on the product.

• Diameter of round front plate: approx. 55 mm
• Rear / panel mount part: approx. 54 mm wide × 23 mm high
• Required depth behind the front plate: approx. 33 mm
• Center-to-center mounting hole distance: approx. 40 mm
• Mounting hole diameter: approx. 8 mm
• Front protrusion including red key: approx. 67 mm

When replacing an existing switch, always check that there is sufficient space for both the panel mount part and the connection cables and cable lugs.

Removable Key

The red key can be removed when the switch is in the off position. This prevents the installation from easily being switched back on. This is practical during maintenance or when a motorhome, boat or vehicle is stored for a longer period.

The included black cover cap can be used to neatly finish the opening when the red key is removed.

Applications

• Motorhomes and camper vans
• Boats and yachts
• Household battery and service battery systems
• Off-grid 12V and 24V installations
• Service and work vehicles
• Battery systems where the main supply must be able to be manually disconnected

Technical Specifications

• Rated current: 200A continuous
• Voltage: 12V / 24V DC
• Type: single-pole main switch
• Version: panel mount model
• Connection bolts: M10
• Front plate diameter: approx. 55 mm
• Panel mount part: approx. 54 × 23 mm
• Mounting depth: approx. 33 mm
• Center-to-center mounting hole distance: approx. 40 mm
• Mounting hole diameter: approx. 8 mm
• Front protrusion including key: approx. 67 mm
• Housing: plastic, red/black
• Key: removable
• Supplied with: red key, black cover cap and switching unit

Note when using as a starter battery switch

Do you want to use this switch in the starting circuit of an engine? Then, in addition to the continuous current, always check the maximum starting current of the relevant starter motor and the allowed short-term load of the battery switch. The engine power in hp alone is not sufficient to reliably determine the required starting current.

For a reliable installation, the cable cross-section, cable lugs, fuses and other components must also be suitable for the current that can flow in the installation.